In the process of using the Laptop, if you are not careful, your computer will suffer from water, drinks, liquids, … pour up. This is the cause of machine damage if you do not handle it reasonably and in a timely manner. Here Taimienphi.vn will share with you how to handle when the laptop is poured by water.
If the previous article we summarized the
Instructions for handling when the Laptop is spilled with water
Dry with simple items
If there is only 1 drop on the keys, your job is to flip the keyboard over and use available absorbent items such as fabric, cotton,… If you have it ready to absorb all these droplets or do not have absorbent items, you can use a blower to dry in an upturned state and turn off the power. But absolutely do not get near heating items to dry. After the machine is completely dry, restart the machine.
Remove water droplets by desiccating
In case water penetrates deep inside, the power must be immediately turned off and the battery removed from the machine immediately. Then pre-dry by using a dehumidifier to suck it up, if there is none, use absorbent items and a blower to dry for a long time. Then put the computer in an airtight container and put in it a bag of desiccant (as in a regular medicine bottle) or put it underneath the container of slaked lime then cover and after about 2 days you take it out, check if those locations are completely dry and then put the machine back into operation.
Use alcohol to interfere with
If you have 99-degree alcohol or it is convenient to buy this alcohol then you can use this to take out liquids other than water. By pouring alcohol over the area and letting it evaporate and dry for a long time. But the outer limb alone and the inside you cannot use these. Then stop moving.
By disassembling the keyboard
After the water changes to the keyboard, you must turn off the power and disassemble the keyboard to dry the areas absorbed by water by using 99-degree alcohol to make it more absorbent, using cotton and soft cloth to absorb,… Then check carefully that it is gone, the way the drop of water is gone, reinsert it and do not restart the machine.
Interferes with the inside of the hardware
If you are hardware savvy and this is the case, you can use tools such as screwdrivers to remove each part of your computer and proceed to dry the parts that water falls on. Then reinsert and restart the machine.
Above is the whole way to dry your laptop due to water falling that you can apply to yourself when you encounter this problem while using the computer. In addition, you can refer to
https://thuthuat.taimienphi.vn/xu-ly-khi-laptop-bi-do-nuoc-2141n.aspx
Image source: Internet